BW-6200R:  IEEE802.11b/g Multi Modes AP/Router
1 WAN Port + 4 Port Switch + AP/ Router/ Bridge / Station

The NAT/NAPT function lets you share the ADSL line to all the Intranet users (support up to 253 users). It also provides virtual server and virtual DMZ functions to let your internal servers be accessed from the Internet.

Wireless Access Point: The wireless access point function can let your IEEE 802.11g/b wireless client devices access the Intranet through this router.

Supports Special Applications: The router can let you setup trigger ports of special applications, and let you utilize Internet services smoothly.

Anti-DoS SPI Firewall: The SPI (Stateful Packet Inspection) firewall can protect your Intranet PCs from illegal access and many kinds of DoS attacks from the Internet, and alert you by e-mail in the first time if some event happens. It also provides Internet access control function.

Virtual Server and DMZ: The virtual server and DMZ function let you setup your servers in the Intranet and still can provide services to the Internet users.

DHCP: Automatically assign IPs to the Intranet PCs.

Web Configuration: You can configure the router through the friendly Web user interface with a browser.


  • All-in-one Internet-sharing AP Router, 4-port 10/100 Ethernet Switch, and 54Mbps Wireless-G (802.11b/g) Access Point

  • Shares a single Internet connection and other resources with Ethernet wired and Wireless-G and -B devices.

  • High security: TKIP and AES encryption, wireless MAC address.

  • Supports Inter-Access Point Protocol (IAPP)

  • Supports Wireless Distribution System (WDS)

  • Supports firewall security with port filtering, IP filtering, MAC filtering, port forwarding, trigger port and DMZ hosting functions.

  • Support PPPoE, VPN pass-through with multiple sessions, PPTP and L2TP

  • Supports PPTP Client on Ethernet WAN interface.

  • Supports UPnP for automatic Internet access.

  • Supports WISP (Wireless ISP)

  • 802.11b/g compliant with up to 54Mbps high-speed data rate

  • DHCP Server/Client

  • Dynamic DNS

  • TCP/UDP/ICMP/ARP protocol stack

  • Wireless users access control

  • Operation modes: AP, AP client (adhoc and infrastructure), Bridge (point-to-point and point-to-multipoint)

  • Universal Plug and Play, no complicated installation necessary

  • Quick and easy setup with Web-based management utility

  • Web-based management and remote management

  • Detachable antenna allows user to replace higher gain antenna

  • 12V Passive Power over Ethernet ( option)

  • 4MB Flash + 32MB SDRAM ( option )



IEEE 802.11g/b

Frequency Band

2.400GHz ~ 2.484GHz 

Radio type

IEEE 802.11g: OFDM(64-QAM, 16-QAM, QPSK, BPSK)


Data Rate

802.11g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps

802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back

Access Protocol


Number of operation channel

2.412~2.462GHz (Canada, FCC) / 11 Channels

2.412~2.484GHz (Japan, TELEC) / 14 Channels

2.412~2.472GHz (Euro, ETSI) / 13 Channels

Operation Mode


AP Client(ad-hoc and infrastructure)


Bridge (point-to-pint and point-to-multipoint)

WDS (Wireless Distribution System)


64/128bit WEP

WPA(TKIP with IEEE 802.1x)

WPA2(AES with IEEE 802.1x)

RF Output Power


802.11g: up to 14 ± 1 dBm

802.11b: up to 18 ± 1 dBm


-68dBm @ 802.11g

-80dBm @ 802.11b


One detachable 2dbi antenna (RPSMA connector)

Dimension (mm)

165(L) x 118(W) x 27(H) (not including antenna)



Operation Temperature

0C ~ 55C ambient temperature

Storage Temperature

-20% ~ 70% ambient temperature


10% ~ 90% (Non-condensing)


One antenna connector

One RJ-45 port for WAN

Four RJ-45 LAN ports

Reset to default button

Power jack

Power requirement